5
7
POST CAPS
Apply pvc glue to the inside of the cap and press completely onto
the top of the post. Press firmly to ensure that the cap is on as far
as it will go.
PVC Glue
9
CLEANING
During installation, your fence may have collected dirt. In most cases to clean your new fence you can just hose it
off. For tougher marks, orange cleaner and a scotch brite pad works well to take those off.
8
HANG GATES
NOTE:
Example on gate posts setting.
For a 3’ Gate you will need to have 36”
between the post and a 4’ gate you will
need 48” between the posts. For double
gates, such as 8’ gates, set post 96”
between post. The gates will be made to
fit those openings. The extra space will
allow for the hinges and latch.
STEP 1
Position the gate in the gate opening and
block up the gate as necessary to line up
the horizontal gate rails with those of the
fence. Hinge placement is optional. We
recommend placing the top hinge about 5”
down from the top of the gate frame and
the other about 5” up from the bottom of
the bottom rail. To install the latch follow
the pre-packaged install instructions in the
package.
1”
1”
Blocks
For more information contact:
HUSKER VINYL inc.
402-923-0323
1-866-918-4695 (toll-free)
47287 U.S. Hwy. 81, Humphrey, NE 68642
e-mail: [email protected] • www.huskervinyl.com
HUSKER VINYL
W
oodland
S
elect
P
rivacy
P
anel
& G
ate
Installation Instructions
