www.PyleUSA.com
www.PyleUSA.com
8
9
Moving Method
Two handles are designed on both ends of the middle cover.
When moving the Product, lift the end opposite ofthe castor, grasp the handle
and move the Product to the desired place.
Storage and Maintenance
Surface Cleaning
Before cleaning, ensure the power switch is turned off, and the attaching plug is
pulled out of the socket
The rubber pedal and covers can be cleaned with a wet cloth containing detergent,
and the detergent should be removed with a cloth
Notice
Do not clean the Product with corrosive detergent such as benzene or thinner, as it
may cause fading, corrosion or crack on the Product. Do not splash water into the
Product to avoid short circuit.
Controller
As wet cloth may cause malfunction of the controller, only dry cloth can be used.
Storage and Maintenance
Make sure that the power switch is turned off and the plug is removed from the
power supply. Clean off the dust and dirt on the Product and keep it clean and
away from places with high temperature or high humidity. If the Product is not
going to be used for a long period of time, a dustproof cover (sold separately)
should be applied on the Product to prevent the entry of dust.
HANDLE
