HURST KL-32, Руководство по эксплуатации

Страница: 18 / 36

18
7.5 Squeezing
Basically, squeezing may only be carried in the area of the tips.
8. Dismantling the equipment / deactivation following
operation
8.1 Spreader
8.2 Hydraulic unit
8.3 Hoses
Once work has been completed, the spreader arms are to be closed so that there is a tip
distance of just a few mm /
in. . This relieves the hydraulic and mechanical strain on the
equipment.
Upon completion of work, the unit must be deactivated.
First of all, decouple the pressure hose then the return hose as described in chapter
“Connecting the equipment”. Ensure that you put the dust protection caps back on to the
couplings.
Free the rescue equipment of any stubborn dirt which may have become attached during
use.
If the equipment is to be stored for a longer period of time, the exterior is to be cleaned
completely and the mechanically mobile parts are to be lubricated.
Avoid storing the rescue equipment in a damp environment.
Also observe the separate manual for the hydraulic hoses.
REMARK:
Never store the spreader with fully closed spreader arms! The complete closure
of the spreader arms can cause hydraulic and mechanical stress to build up
again.
Squeezing zone