Hurricane 3-PT-Swinger, Руководство пользователя

Страница: 10 / 18

HURRICANE DITCHER CO., INC.
THE “SWINGER” BY: HURRICANE
PAGE 10
Step 5
– Release chain tension until impeller wheel and PTO turn freely
(See Idler Adjustment section
below) .
IDLER ADJUSTMENT
Remove the inspection plate on top of the gearbox. Visually inspect the UHMW plastic wear pad
for wear or damage (See page 13 item D5) . Replace if needed. The idler adjustment assembly has one
(1) bolt and one (1) nut (See illustration below). The bolt holds the idler assembly against the chain and
the nut acts as a jam nut to lock the assembly in position. Reinstall inspection plate using quality grade
silicone sealant under the inspection plate.
Chain needs MORE tension:

Loosen Nut

Tighten Bolt to remove any slack and apply slight
tension on chain

Tighten Nut to secure the assembly
Chain needs LESS tension:

Loosen Nut

Loosen Bolt until chain is too loose

Tighten bolt to remove any slack and apply slight tension
on chain

Tighten Nut to secure the assembly

CAUTION!!

Read the Operator’s Manual.

Learn to operate this machine SAFELY.

Be alert. Observe ALL Safety Practices.

Machines can be hazardous in the hands of
an UNFAMILIAR, UNTRAINED or
COMPLACENT operator.

Do not risk INJURY or DEATH!