HURNER HST 300 Manual USB 2.0, Руководство пользователя

Страница: 24 / 39

Version February 2014
12
EN
HÜRNER HST 300 Manual USB 2.0 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
8.1 Selecting the Display Language
When the “Language” sub-menu was selected, the screen changes
and the display reproduced in Display 6 appears.
Use the arrow keys ñ and ò to select one of the options, “Deutsch,”
“English,” and “Français” and confirm by pressing the START/SET
key.
8.2 Setting the Clock
When the “Date/Time” sub-menu was selected, the screen changes
and the display reproduced in Display 7 appears.
The time of day and the date can be set using the keypad. The portions
“Hour,” “Minute,” “Day,” “Month,” and “Year” are set separately.
Press the START/SET key to confirm your settings.
8.3 Setting the Buzzer Volume
When the “Buzzer Volume” sub-menu was selected, the screen changes
and the display reproduced in Display 8 appears. The buzzer can also
be heard. Turn the buzzer volume up or down to the desired value
using the
ï , ð arrow keys (from 0 to 100) and confirm your setting
by pressing the START/SET key.
9 Self-Monitoring Functions Overview
9.1 Errors During Data Input
9.1.1 No Contact
There is no properly established electric contact between the welding
unit and the fitting (check push-on terminal on fitting), or the heater
coil is defective.
9.1.2 Low Voltage
The input voltage is below 175 volts. Adjust generator output volt-
age.
9.1.3 Overvoltage
The input voltage is over 290 volts. Decrease generator output volt-
age.
9.1.4 Overheated
The transformer temperature is too hot. Let the welding unit cool
down for about 1 hour.
9.1.5 System Error
CAUTION!
The welding unit has to be disconnected immediately from both the
power supply and the fitting. The auto-test has detected an error in
the system. The unit must no longer be operated and has to be sent
to an approved shop for check and repair.
9.1.6 Clock Error
The internal system clock works improperly or is defective. Reset it, or
send the welding unit to the manufacturer for check and service.
Display 6
***** LANGUAGE *****
>Deutsch
English
Francais
Display 7
Date/Time
21.06.2013 14:28
Display 8
Buzzer Volume
< ------20-------- >