Hurco winmax Скачать руководство пользователя страница 35

Страница: 35 / 254

WinMax Lathe NC Programming

704-0115-307

Overview

1-15

Program Editing Features

Several editing features are available with the WinMax Lathe Max control. Keyboard and

software features provide you with the editing capabilities to create and update part

programs.

The console keyboard contains these keys:

•

Programming Mode keys—Input, Review, and Menu keys.

•

Standard AT-keyboard keys—Insert, Delete, Home, End, Page Up, Page

Down.

•

Cursor Control keys—Arrows, Enter, alt, C, and F function keys. Refer to

Getting Started with WinMax Lathe, Cursor Control Keys, on page 1 - 31.

•

Draw key—displays the graphic in wireframe view. Refer to Getting Started

with WinMax Lathe, 3D Wireframe Graphics, on page 4 - 85 for more

information about Wireframe Graphics.

•

Verify key—displays the graphic in 2D or 3D view. Refer to Getting Started

with WinMax Lathe, 3D Verification Graphics, on page 4 - 93 for more

information about Verification Graphics.

•

Optional AT-Keyboard—allows you to enter data using a keyboard. Refer to

Getting Started with WinMax Lathe, AT-Keyboard, on page 1 - 32.

The software provides these features:

•

Pop-up Text Entry window—allows you to enter text, such as naming a

part program, if the console does not have an optional AT-keyboard. Access

this feature by selecting the keyboard icon on the bottom of the screen.

•

NC Subprogram Review screen—lists the data blocks in a program and the

tools programmed for each block. Refer to Program Review, on page 1 - 16

for information about using this screen.

•

Tool Review screen—lists the tool number, type, orientation, size,

programming mode (diameter or radius), speed, and feed for each tool

programmed in the data block. Please refer to Getting Started with WinMax

Lathe, Tool Review, on page 4 - 76 for details about using Tool Review.

Please refer to Getting Started with WinMax Lathe, Consoles, on

page 1 - 5 for additional information about the console.

Please refer to Getting Started with Your WinMax Lathe, Standard

Keys, on page 1 - 30 for details about using these keys for specific

functions for Tool Setup or Tool Review.

Refer to Program Review, on page 1 - 16 and for details about using

these keys with the Program Review screen.

Содержание winmax































































































































































































































































Результаты поиска

Содержание winmax

Отзывы:

Hurco winmax, Руководство по программированию, Страница: 35 / 254

Результаты поиска

Содержание winmax

Отзывы: