Hurco Old Faithful HTP10-500, Справочное руководство и руководство пользователя

Страница: 5 / 16

www.GETHURCO.com 1-800-888-1436
www.hurcotech.com
Important Safety Information
3
WARNING!
READ ALL OPERATING MANUALS
BEFORE OPERATION OF EQUIPMENT
GENERAL SAFETY INFORMATION
SAFETY FIRST!
Hydrostatic pressure testing of water mains can be extremely dangerous if not done properly. You must follow all the safety
guidelines and use common sense when operating a hydrostatic test pump.
Never take chances; it could cost you your life!
WARNING:
•
This pump is for pumping water only. Pumping other fluids can be dangerous causing personal injury and
will void all warranties.
ALWAYS
•
wear protective clothing and safety glasses when operating machinery.
NEVER
•
service or repair the Old Faithful Pumper while running. Allow engine to cool.
ALWAYS
•
shut off engine and do not smoke when fueling the Old Faithful Pumper.
ALWAYS
•
release all pressure within the pump before servicing any component.
NEVER
•
operate a gasoline engine in an enclosed area. Be sure area is well ventilated.
NEVER
•
pump at pressures higher than the maximum recommended pressures for the pump. (see Specifications in
Hypro Manual)
NEVER
•
operate your Old Faithful Pumper in temperatures below 45° F. Doing so will damage the pump and can be
extremely dangerous, causing serious injury or death.
NEVER
•
make a connection to your water main with old, worn or inferior parts. These parts can break under pressure
and cause serious injury or death.
ALWAYS
•
secure all hoses and fittings. These fittings and hoses are under pressure and if there is a failure, they can
“whip,” causing serious injury or death.
ALWAYS
•
wear protective clothing and eye protection. When working with chlorine, wear protective clothing as
recommended by the chlorine manufacturer.
Periodically inspect system components. Perform routine maintenance as required.
•
Refer to the Hypro Medium or High Pressure Diaphragm Pumps manuals for additional safety information.
•
WARNING: Your life depends on every move you make when hydrostatic testing. Don’t leave anything to chance. Check
every detail of your Old Faith Pumper and all connections before starting the engine.