Hurco AB6, Руководство по установке

Страница: 160 / 165

Index
Autobend 6 November, 1999 I-1
9-pin connector, 2-108 to 2-111
A
Adira upacting press brake
speed change switch, 2-67, 2-85
Adjustable leg assembly, 2-41
Advance cable
Adira upacting p brake, 2-67, 2-85
Guifil upacting p brake, 2-69, 2-87
Advance relay
hydraulic press brake, 2-59, 2-77
ram stroke, 2-71, 2-89
ram up circuits, 2-72, 2-90
solenoid, 2-72, 2-90
up relay, 2-72, 2-90
upper limit switch, 2-59, 2-77
Advance switch
foot treadle, 2-62, 2-80
mechanical press brake, 2-59, 2-61,
2-63, 2-77, 2-79, 2-81
Pitman assembly, 2-61, 2-79
ram stroke, 2-61, 2-79
rotating shaft, 2-61, 2-79
upacting press brake, 2-59, 2-62,
2-63, 2-77, 2-80, 2-81
Autobend power cabinet, 2-5
mounting to press brake, 2-5
safety decals, 2-4, 2-5
AWG wire, 2-112
Axis
orientation, 1-7
X-axis, 1-7
Y-axis, 1-7
B
Back key, 1-21
Bend key, 1-21
Bend,
most recently operated display, 1-22
number available, 1-22
C
Cable, 2-97
control console, 2-105
retract, 2-97
runs, 2-5
S6 gauge installation, 2-108
S7 gauge installation, 2-108, 2-109
S8 gauge installation, 2-108 to 2-111
shielded cable, 2-60, 2-78
two-conductor shielded cable, 2-60,
2-78
Calibration, 1-22
Carriage arrestor bars, 1-12, 2-50, 2-53
Caution tape, 1-10
Checklist
installation, 1-2, 2-117
Clear key, 1-21
Component mounting, 1-1
Console keys, 1-21
Control console, 1-5, 2-7, 2-105
display, 1-20
layout, 1-20
maintenance schedule, 3-1
membrane keys, 1-21
Run key, 1-14
Stop key, 1-4, 1-14
Control pendant arm, 2-8, 2-9, 2-105
Cord grip conduit fitting, 2-60, 2-78
D
Date, 1-22
Decals
safety, 2-4
Delete key, 1-21
Die retainer plates, 2-14, 2-15
Dimensions
mounting for dual gauges, 2-32
mounting hole, 2-18, 2-21, 2-24,
2-25
X for dual gauges, 2-29
Dovetail slots, 2-14
Drill bits, 2-3