EN
17
6.
Timer: During operation, it is possible to activate the timer. Touch the "Timer" button,
the time "0:00" will be displayed on the screen with ":00" in the flashing mode; turning
the handle, set the operation time in minutes. Touch the "Timer" button again, "0" will
transfer to the flashing mode; turning the handle, set the operation time in hours. When
the required value is reached, the screen will be flashing for 5 seconds, then the timer
will be fixed. The timer can be set up to 24 hours of operation. If it is required to
deactivate timer, touch the "Timer" button 3 times in succession.
7.
After the use or during the use, if it is required to switch off the induction cooker, press
the "ON/OFF" button. The cooker operation will be suspended, and the device will
transfer to the standby mode.
8.
Attention! Do not disconnect the device from the mains immediately after completion
of work. The forced ventilation system of the induction cooker will continue operation
during 1 minute for correct cooldown of the device. Only thereafter disconnect the
device from the main power supply.
9.
Always disconnect the induction cooker from the mains after completion of work.
10.
It is recommended to clean metal and glass elements of the device every day (see
section 8 hereof for more details).
4.
FAULT CODES
COD
E
FAULT
COD
E
FAULT
E0
Central control unit is faulty
E5
Error in operation of the cooker or
central control unit
E1
Dishware is missing
E6
Current overload
E2
Too
low
power
supply
voltage
E7
Circuit break or short-circuit of IGBT
(insulated-gate bipolar transistor)
E3
Too high power supply
voltage
E8
Overheating of ceramic panel
E4
Circuit break or short-circuit
of temperature sensor
E9
IGBT overheating
5.
PROTECTION DEVICES
This cooker has been developed specifically for professional use.
1.
Overvoltage protection
If the power supply voltage varies within the range from 80 tp 280 V, the cooker settings
and the setup of required power will occur in automatic mode. When the voltage comes
out beyond the abovementioned range, the cooker will automatically transfer to the
standby mode.
2.
Overheating protection
The temperature sensor monitors the temperature inside the cooker. If the sensor registers
overheating, the cooker will automatically transfer to the standby mode.
