HURAKAN HKN-12CR, Руководство пользователя

Страница: 10 / 31

EN
10
Recommendations for single-phase motor operation
If the chopped meat does not come out easily or comes out in the form
of a thick mass, the reasons for this and the ways to eliminate them may
be as follows:
a) The front hold-down nut is tightened too tightly, so the blade does not
fit properly to the grid
— remove and re-tighten the hold-down nut;
b) The grid is blocked — wash the grid;
c) The edges of the blades are blunt — sharpen or replace the blades.
Before use, make sure that the power supply meets the motor specifications. The voltage
difference
is ±5% of the rated voltage. If the voltage exceeds 230 V or is below 201 V, a
transformer or a stable power supply unit must be used with a power rating 10% higher than
that of the electric motor.