Huntleigh Sonicaid FM800 Series, Инструкция по эксплуатации, Страница: 69 / 130

Sonicaid FM800 Encore Series Instructions for Use
69
8.4
76B
Controlling alarms
There are four ways of controlling alarms:
 Acknowledge (i.e. silence) it when it occurs. See Section 8.3.
 Switch it off, so that it is never triggered.
 Alter thresholds so that it occurs more frequently or less frequently.
 Alter the volume of the audio alarm.
213B
Switching alarms off
To switch an alarm off, press the parameter key, then OFF, then EXIT.
214B
Altering alarm thresholds and volume
See Chapter 9.
8.5
77B
Recording fetal movements
The mother can record fetal movements using the optional fetal event marker. A
triangular event mark is printed at the top of the fetal heart rate trace, a message appears
in the bottom left corner of the screen, and FM800E beeps, if the audible beep is switched
on.
1 Connect the event marker to the jack socket on the side of FM800E.
2 Give the event marker to the mother. Tell her to press the button every time she feels
a fetal movement.
215B
To turn the audible beep off or on
1 > SETUP > NEXT PAGE > SYSTEM SETTINGS > access code (2755).
2 > AUDIO/GRAPHIC > EVENT MARK.
3 > EXIT.