Huntleigh 8901-8,8902-8, Руководство пользователя

Страница: 22 / 36

AKRON 900A, 901A, 902A, 8900-8, 8901-8, 8902-8, 8904-8
20
4. Accessories – Operating Instructions
Cervical Sitting Unit (Model 8903)
Operating Instructions
The patient may now be seated against the foot section/backrest. Adjust the backrest to make the patient
comfortable.
Place the head halter over the patient’s head/neck area, so that the halter supports the head under the chin
and across the back of the head.
A cervical contour pillow (model JC102) should be placed under the neck and head for patient comfort.
To remove the slack from the extension cord using the ATP9 Traction Machine, proceed as follows:
1.
With the hold and rest timers set to zero, set the high force control to indicate 35Kg or less if
required.
2.
Set duration of treatment timer to 20 minutes or less if required.
3.
Push ‘START’ button to commence the first run.
4.
Push ‘STOP’ button when zero force is reached. This will take up all the slack which could not be
achieved manually.
Check the correct functioning of the ‘patient interrupt’ switch and pass it to the patient concerned.
The ATP9 Traction Machine should be switched off and the head halter removed after treatment. It is
advisable to allow the patient 5 to 10 minutes recovery before removal from the table.
A more detailed account of the operation of the ATP9 Traction Machine can be found in the ATP9 User
Manual.