Huntington Home SL-4046-RC, Руководство пользователя

Страница: 8 / 26

_______ ___ _______ ___Assembly
4
WARNING: LASER RADIATION. NEVER SHINE INTO EYES OR
FACE. DO NOT STARE INTO BEAM!
SAVE ALL INSTRUCTIONS!
Helpful hints:
•
Projection lights will appear brightest in the dark and may look dimmer if there are competing
sources of light, like street lights or porch lamps.
•
Projection lights are intended to operate in temperatures from -30°F to 100°F. At or below
freezing temperature, the projection light may take up to 10 minutes to warm up and reach full
projection strength.
DISTANCE TO SURFACE COVERAGE
10 feet 200 sq ft
20 feet 800 sq ft
25 feet 1200 sq ft
30 feet 1800 sq ft
35 feet 2500 sq ft
40 feet 3000 sq ft
FCC PART 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may cause harmful interference, and (2) this device must accept any
interference received, including interferences that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experience radio/TV technician for help.