© Hunter Douglas 1-2022
6
ZIP 100 Zip-screen
Screw-fit side guides
Installation - Maintenance
Finish the installation by assembling the
cover profiles on both sides.
Steer in the side of the cover profiles
that are facing the window, make sure
the plastic profile is not being stuck bet
-
ween the aluminium profiles, and that
both alu.profiles and the plastic profiles
are aligned at the bottom end cap.
Connect the motor to the electricity.
Run the Zip-screen down + up and check
that it operates smoothly.
If needed - program the end positions
according to relevant instructions from
the motor fabricator.
4.
Assembling the cover profiles
When the cover profiles are in place
– gently screw* the profiles onto the
guide profiles using the pre-fabricated
holes.
*Use a screwdriver – do not overtighten.