HunterDouglas Vertiglide Applause Honeycomb, Инструкции по установке и уходу

Страница: 48 / 52

48
Front
Of
Shade
Front
Attach The Handle(s)
If the handle is not already attached to the
shade, do the following:
Position the handle so the holes on the flat
portion of the handle are aligned with the
screw holes on the moving rail. The curve
of the handle should face out, away from
the fabric.
Attach each handle to its moving rail
using the provided screws. Holes are
pre-drilled into each moving rail.
Headrail Removal
To remove the headrail, first remove the
valance by popping the valance off of
the headrail.
To remove the headrail, hold the
headrail assembly and push back on the
bottom tab of the mounting bracket to
releasethe bottom edge of the headrail.
Roll the back of the headrail downward
and out from the bracket.
CAUTION: Because the bracket is stiff, the headrail may be difficult to remove.
Use a flat blade screwdriver wrapped in a soft cloth. Push the blade against the
bottom tab of the mounting bracket and twist slightly to pop the rail off the bracket.
Be careful not to scratch the finish on the back of the headrail.
■
■
■
■
■
CARE AND CLEANING
Hunter Douglas honeycomb shades are made of an anti-static, dust-resistant fabric
which repels dirt and dust.
Dusting
Regular light dusting with a feather duster is all the cleaning that
is needed in most circumstances.
Vacuuming
Use a hand-held vacuum with low suction for more thorough
dust removal.