INSTALLATION
8
Platinum
™
Satellite Eye
From the top of the headrail, check that the 6-wire connector from the satellite eye is
■
securely inserted into the 6-port plug on the motor housing. If the connection is loose, make
sure the orientation of the plug is correct before attempting to make the connection.
Do
not
force the connection. Needlenose pliers may be helpful in making the connection, if
necessary.
Valance Clips
Attach valance clips to the
■
headrail, as shown.
Evenly space the valance clips
■
along the length of the headrail,
no more than 36" apart.
Do
■
not
place the valance clips
where they could interfere with
any working parts.
If desired, the valance may be positioned ¼" higher by raising the clips one notch up,
■
as shown in the illustration above.
Cornice Clips — Wood Blinds Only
Cornice clips are used instead of valance clips when the valance has a dust cover.
Attach a cornice clip 2" from each end of the headrail.
■
Space additional clip(s) evenly between the two end clips so that the cornice clips are no
■
more than 36" apart.
Do
■
not
place the cornice clips where they could interfere with any working parts.
Two-Port
Power Plug
Outer End of Motor Housing
Tiltrod Side of Motor Housing
Six-Port
Satellite Eye
Plug
Tiltrod
Inserted
Here
Standard
Position
Raised Clip for a
Higher Valance
Front of Headrail
No More Than 36"
2"
2"
No More Than 36"
