HunterDouglas Duolite Shades, Установка Эксплуатация Уход

Страница: 6 / 24

INSTALLATION
4
Mount the Brackets — Inside Mount
■
Mark 4" from each jamb for bracket location.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location.
Allow a minimum of
18" from the motor end for the battery wand.
Mount into wood whenever possible.
■
Center the brackets on your marks, then mark each of the
screw holes.
➤
The minimum mounting depth required for PowerView
®
shades with battery wand is 2
1
⁄
4
", all other shades are 1
5
⁄
8
".
➤
Fully recessed mounting for PowerView shades with battery
wand is 4
5
⁄
8
", 4" for cassette to be flush with the front of
window casement.
IMPORTANT: The front edges of the installation brackets
must be level and aligned to each other.
■
Drill the screw holes using a
3
⁄
32
" drill bit.
■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
Shims are not provided.
■
Attach the installation brackets using the screws provided.
WARNING: Product is heavy. Mount into wood/metal studs or into concrete
with concrete anchors. Drywall anchors are not recommended.
Proceed to “STEP 2 — Install the Shade” on page 6.
Installation Brackets Jamb Jamb
Space Evenly Space Evenly 4" 4"
Minimum 18" for Battery Wand
Motor
End
4"