16
42885-01 • 03/30/10 • Hunter Fan Company
Installing the Glass Bowl
9-8. Install the included bulb.
9-9. Thread the light and fan pull chains through the
hole in the center of the glass bowl.
9-10. Place the cover plate up against the glass bowl.
Align the holes in the cover plate and glass
bowl.
9-11. Thread the fan pull chain and light pull chain
through the appropriate holes.
9-12. Screw the finial onto the threaded rod end
until tight.
9-13. Attach the extra pull chains (included) to
the light and fan pullchains using the plastic
breakaway connector. (You may find the plastic
breakaway connector on theend of the extra
chain.)
9 • Completing Your Installation With or Without a Bowl Light Fixture
Light Bulb
(Pin Base CFL)
Finial
Breakaway
Connector
Light
Pull Chain
Fan
Pull Chain
Cover Plate
Light
Pull Chain
Fan
Pull Chain
Step 9-8
Note:
In compliance with Canadian energy regulations, this ceiling
fan contains a device that restricts the light kit to a maximum
of 190 Watts. Exceeding that limit or the marked limit on this
product may result in fire hazard or improper operation.the
troubleshooting section
