Hunter TCX56 Скачать руководство пользователя | Manualshive

Страница: 3 / 68

background image

Thank you for choosing our Tire Changer

Hunter Engineering Company

Dear Purchaser

Thank you for purchasing your Hunter Tire Changer.

Your Tire Changer has been designed to provide years of safe and dependable service, as long as it is used and
maintained in accordance with the instructions provided in this manual.

All persons who will use and/or maintain this Tire Changer must read, understand and follow all warnings and
instructions provided in this manual, and be properly trained.

This Owner’s Manual should be considered an internal part of your Tire Changer and should remain with the Tire
Changer. However, nothing in this manual, and none of the devices installed on the Tire Changer, substitute for
proper training, careful operation, good judgment and safe work practices.

Always be sure that your Tire Changer is in optimum working order. If you suspect that anything is not working
properly, or that a dangerous situation may exist, immediately shut down the Tire Changer and remedy any condition
before you proceed.

If you have any questions concerning the proper use or maintenance of your Tire Changer, please call your authorized
Hunter Engineering Company representative..

You can also contact Hunter Engineering Company at Tel: 800-448-6848 or 314-731-3020, Fax. 314-731-1776 or use

Sincerely,

Hunter

Engineering

Company

«
1
2
3
4
5
...
»

Содержание TCX56





































































Отзывы:

Нет отзывов

Похожие инструкции для TCX56

Бренд: Jema Autolifte Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды