manualshive.com logo in svg

Hunter Royal Oak 50466, Руководство по установке, Страница: 9 / 12

Поделиться
Скачать
Hunter Royal Oak 50466 Скачать руководство пользователя страница 9

7

8

1886

1886

Ceiling Bracket

Downrod

Hanging Fan

Wiring

Canopy

Blades

Remote Cradle

Remote

Canopy Screw

Screw assembly screws from the 

 hardware bag halfway into 

the motor housing. It does not 
matter which two screw holes 
you choose.

Connect the plugs from the upper and lower 
switch housings. Make sure to line up the 
colored markings on the connectors.

Partially install two of the assembly screws 
found in the 

 hardware bag. Align the 

notches in the sides of the lower switch 
housing with the screws on the upper switch 
housing. Twist the lower switch housing 
clockwise to lock into place. 

Install the last assembly screw. Tighten all three 
screws securely.

Feed the wire plug through the center 
hole of the upper switch housing, 
then wrap keyhole slots around the 
screws and twist counterclockwise.

Insert a third screw, found in the 

 hardware bag, into place and 

then tighten all three screws.

1 of 3

1 of 3

2 of 3

Assembly Screw

Assembly Screw

Assembly Screw

bag

bag

bag

2 of 3 

bag

1

STEP

4

STEP

5

STEP

6

STEP

2

STEP

3

STEP

Assembling the Switch Housing

WARNING

FAN FALL HAZARD

Make sure all three screws are tight to secure 

the upper switch housing to the mounting plate.

Fan style may vary.

Note: 

Assembly Screw

Want to install your fan with a light kit? 

Go to 

www.HunterFan.com/FAQs

 and click 

“How do I install my fan with the light kit?”

Hunter Pro Tip:

Содержание Royal Oak 50466













Отзывы:

Нет отзывов