5
Maintenance
Cleaning:
Note: ALWAYS
before cleaning.
NEVER
allow water to sit in the tank when not
in use.
Cleaning the Water Tank -
Fill the Water Tank with a mixture of one (1) gallon of water and
eight (8) ounces of white vinegar. Leave the mixture in the Water
Tank for 20 minutes, giving the Water Tank a shake every few
discard the mixture.
Cleaning the Water Basin -
Dampen a cloth with a solution of vinegar and water. Wipe
with cool water. DO NOT IMMERSE the Water Basin or hold
Cleaning the Base -
cloth. Do not immerse the Base in water or use water to clean
the Base. As with any electrical appliance, an electrical shock
Cleaning the Nebulizer -
particularly in areas with hard water. Overcome this by cleaning
the Nebulizer with water and vinegar on a soft cloth regularly
as follows:
•
Dampen a cloth with vinegar and wipe the Nebulizer gently,
until the lime deposits disappear completely.
•
Gently clean with a dry cloth and remove the residue from the
nebulizer.
Cleaning the Fan Vent -
and free of obstructions. Simply wipe the Fan Vent with a clean,
surface as the Fan Vent may become blocked and cause the unit
to overheat.
Cleaning the Water Level Sensor -
The Water Level Sensor is made up of the Plastic Cap, the
Water Float, and the Pin. Wipe the parts with a soft damp cloth.
down the Water Basin (Figure 5) with the damp cloth. Rinse
Nebulizer (Figure 5) directly under the water tap.
There may be some lime deposits in the Nebulizer (Figure 5),
It’s important that the Fan Vent area (Figure 6) is kept clean
screwing the Plastic Cap onto the Pin. (Figure 7)
Figure
Figure 6
7
Figure 5
Water
Level Sensor
Nebulizer
Water Basin
Fan Vent
Phillips Head Screw
Plastic Cap
Pin
Water Float
Wipe all exteriors surfaces of the Base (Figure 5) with a soft, dry
20304-01 R20150420
