Hunter Premium PRO 4G, Инструкция по эксплуатации, Страница: 25 / 80

24 25
6.2 Camera stops taking images or won’t take images
1. Please make sure that the SD card is not full. If the card is full,
camera will stop taking images. Or user can turn on Cycle Recording
to avoid such problem.
2. Check batteries to make sure that alkaline, or NiMH AA batteries left
power is enough for camera to work.
3. Make sure that the camera power switch is in the “On” position and
not in the “Off” or “Test” modes.
4. When 4G function is on, there will be around 1 minute interval for
camera to send out photo before camera shooting the next photo.
Turn off the GPRS, camera can shoot photos continuously.
5. Please format the SD card with camera before using or when
camera stops taking images.
6.3 Night vision flash range doesn’t meet expectation
1. Please check to make sure that batteries are fully charged or left
power is enough.
2. “Max Range” offers better IR flash range. Given IR flash range
values are based on Max Range setting; so please adjust Night Mode
to Max Range for better night vision flash range.
3. High-quality 1.5V NiMH rechargeable AA batteries can also offer
much better IR flash range; alkaline batteries cannot deliver enough
amperage to power the illuminator consistently at night.
4. To ensure accuracy and quality of night time image, please mount
camera to dark environment without any obvious light sources.
5. A certain surroundings (like trees, walls, ground, etc.) within flash
range can get you better night time images; please do not aim camera
to total open field where there is nothing within IR flash range to
reflect flash back; it’s like shinning a flashlight into sky in night, you
just can’t see anything; same does camera.