9
©2011 Hunter Fan Co.
44827-01 20111013
Figure 14
Figure 13
Figure 15
GRILL ASSEMBLY (CONT.)
Front Grill
Hunter Logo
Grill
Ring
Screw
Screw
Ring Cover
Back Grill
Figure 16
Cord Clip
Cord
Notch
6. Remove the grill ring from the front grill by loosening
the screw holding it.
7. Place the front grill against the back grill so that the
Hunter logo faces right side up and push together
until the tabs on the grills hold them together. Figure 13.
8. Slide the grill ring over both front and back grills
turning the ring so that the screw that secures it, is on
the bottom. Figure 14.
9. Tighten the screw to secure the grill ring over both
the front and back grill. Place the ring cover over the
screw. Figure 15.
10. Straighten the cord from the motor housing along the
telescoping pole and snap the cord clip over the cord
onto the pole so that the cord rests in the notch on the
clip. Figure 16.
