5
FUSED PLUG
This plug is a safety feature. It contains a safety
device (fuse) that should not be removed. Discard
injury,
DO NOT
remove, replace, repair or tamper
not function properly, it may be due to the safety
device incorporated in this plug.
If the fuse fails, it is generally due to a short circuit
or circuit overload. Replace the fuse as per the
instructions below. If the replacement fuse fails,
immediately unplug the unit and contact our
technical support department for assistance.
FUSE REPLACEMENT:
the product if the attachment plug is damaged. To
with the originally supplied plug. If the fan does
61401-01 20150202
1. To replace the fuse, first turn the unit off and unplug
it from the wall. Locate the door on top of the plug.
Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord. Figure 1.
2. Slide the door on top of the plug towards the blades.
Figure 2.
3. Carefully remove the fuse from the clips holding it on the
top and bottom. Figure 3.
Warning! Electrical Hazard!
Only replace with a fuse type
and rating matching what was removed from the product. If
the product fails a second time, immediately unplug it and
contact our technical support at 1-888-880-3267.
4. Gently push the fuse back into the pins that will hold it in
place.
Note:
If the fuse is not seated properly, the unit will not function.
5. Slide the door back over the fuse box in the plug.
6. Plug the fan back in and resume use.
Figure 1.
Figure 2.
Figure 3.
