WIRING
1.
Strip about 0.5” (13 mm) of insulation from the end of each AC power wire.
2.
Route the wires through the conduit opening inside the junction box.
3.
Connect the incoming black power wire (
HOT
) with the black wire lead from the
transformer.
4.
Connect the incoming white wire (
NEUTRAL
) with the blue lead from the
transformer.
5.
Connect the incoming green wire (
GROUND
) with the green and yellow wire from
the transformer.
6.
Cap the unused brown wire coming from the transformer. Replace the cover of
the junction box and screw it into place.
7. Replace cover, turn on the power, and test.
Copyright 2021 Hunter Industries. All Rights Reserved.
5
Содержание Hydrawise HCC-800-M
Страница 1: ......