Hunter H39 Скачать руководство пользователя страница 40

Страница: 40 / 216

Hunter also warrants to the first-use purchaser and any subsequent owner during the warranty

period that the boat will be free from gelcoat blistering on underwater surfaces of the hull, exclud-

ing the keel and rudder, for a period of five (5) years from the date of delivery to the first-use

purchaser under normal use and service. During this period, Hunter will supply or reimburse an

authorized Hunter dealer for all of the parts and labor required to repair a blistered underwater

surface of the hull. The labor cost reimbursement will be based on the Labor Allowance Schedule

established by Hunter from time to time, however if the repair is performed by a non-Hunter

dealer, the repair cost must be authorized by Hunter in advance and be based on a reasonable

number of hours as determined by Hunter. Hunter will not pay transportation, hauling, launching,

bottom paint, storage, dockage, cradling rental, rigging and derigging, or other similar costs. It is

recommended that the repair be done during a seasonal haul out for service or storage.

PLEASE KEEP THIS MANUAL IN A SAFE PLACE AND HAND IT OVER TO THE

NEW OWNER IF YOU SELL THE CRAFT.

You should also complete the warranty cards for your engine, stove, head, electric water pump

and other accessories. These are enclosed in the manufacturers’ manuals that are packaged

with your owner’s manual.

HUNTER ExPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF

MERCHANTA BILITY AND FITNESS. NEITHER HUNTER OR THE SELLINg DEALER SHALL

HAVE ANY RESPONSIBILITY FOR LOSS OF USE OF A BOAT, LOSS OF TIME,

INCONVENIENCE, COMMERCIAL LOSS, OR CONSEqUENTIAL DAMAgES.

Hunter • Limited Warranty

3.4

Содержание H39

























































































































































































































Результаты поиска

Содержание H39

Отзывы:

Hunter H39, Руководство оператора, Страница: 40 / 216

Результаты поиска

Содержание H39

Отзывы: