manualshive.com logo in svg

Hunter H33, Руководство оператора, Страница: 69 / 214

Поделиться
Скачать
Hunter H33 Скачать руководство пользователя страница 69

Fuel Systems

The fuel systems aboard your Hunter boat consists of the
following components or sub-systems. 

Fuel Tank
Fuel Fill
Fuel Vent
Fuel
Lines
Fuel Filters
LPG (Liquefied Petroleum Gas) System

5.1 Fuel Tanks

Your boat is equipped with a fuel tank. In the aft state-
room under the bunk.

The tank is filled through a fuel fill.

If your boat has a metal or aluminum tank installed, then 
the fuel tank should be inspected for signs of leaks, cor-
rosion, and/or pitting at least once a year.  Corrosion
normally appears as a white, chalky, or flaky substance
on the surface of the tank.  Sometimes, it also appears 
as pitting or small pockets of missing aluminum.  Another 
indication of corrosion is bubbles on the paint that coats
the tank.  If any of these conditions are present, have an
authorized service technician inspect the tank immedi-
ately.  If a leak is found, turn off battery switches and dis-
connect shore power (See  Connecting  & Disconnecting
Shore Power, AC Electrical System), which explains
the proper way to disconnect and  disable any possible
source of  ignition).  Contact  your dealer or Customer 
Service immediately.

5.1.1  Fuel Tank Capacity Monitoring

The fuel tank is equipped with a fuel level sending unit, which

provides  an  electrical  signal  to  the  display  located  at the helm.

•
•
•
•
•
•
•

5.1.1  Fuel Tank Grounding System

The fuel tank and fuel fill on your boat are electrically 
grounded to the engine negative. (see the DC Electrical
chapter).  This grounding system is designed to prevent
the discharge of static electricity when fueling your boat. 
An authorized service technician should inspect this sys-
tem at least once each year.

5.1.2  Fuel Gauge

The  fuel  gauge as shown in Fig. 5.1 is located at the
helm, and is the indicator of the fuel level in your tank. 
Visually  inspect the reading  against what  is show-
ing in the tank to see that the gauge is operational.

DANGER

!

!

Never enter the engine room without proper ventila-
tion first.  A spark caused by power tools or lighting 

equipment could result in fire or explosion which

could cause personal injury or death.

Hunter 33 • Fuel Systems

5.3

Содержание H33























































































































































































































Отзывы:

Нет отзывов