Hunter AirMax HP980, Инструкция по эксплуатации

Страница: 7 / 15

• NEVER block the air openings, grills/outlets or place on a soft surface such as a
bed or sofa, as this could cause the unit to tip over, blocking the air intake or
outtake opening.
• DO NOT attempt to repair or adjust any electrical or mechanical functions on this
unit. Doing so will void your warranty. The inside of the unit contains no user
serviceable parts. All servicing should be performed by qualified personnel only.
• DO NOT place anything on top of unit.
• This Air Purifier is designed for use on a level floor and may not work properly on
an uneven floor. ALWAYS place the Air Purifier on a firm, level floor. ALWAYS place
the Air Purifier at least six (6) inches away from walls and heat sources such as
stoves, radiators, or heaters.
Press the On/Off button to turn your air purifier on or off.
Press the Speed button to select Low, Medium, High, or Turbo fan
speed. Selected speed will display above the Speed button. (1)
Low provides the best product sound, (2) Medium offers moderate
cleaning, (3) High provides strong cleaning power, and (4) Turbo
provides maximum cleaning power.
To use timer function, select desired fan speed and press Timer
button to select between 1-12 hours of operation. Selected time,
in hours, will display above the Timer button. Your air purifier will
turn off after specified time.
When Sleep Mode is activated by pressing the Sleep Mode button,
your air purifier will operate on Low for 8 hours and lights will turn
off. After 8 hours, your air purifier will change back to original
settings and lights will come back on.
1. Carefully remove your air purifier from the packaging and the plastic bag.
2. Please put on the flat floor when using. For proper air flow, locate the unit at
least six (6) inches from any wall or furniture. DO NOT block air opening.
3. Plug the 2 prong power cord into a 120V AC electrical outlet.
4. Always lift your air purifier by the handle of the unit.
5. Operate indoors only.
Safety Instructions
Installation Requirements
4
Press the Auto button to turn on Auto Mode. Auto Mode
automatically adjusts fan speed based on air quality. If air quality is
good (low VOC and particle levels) Low Speed is used. If air quality
is bad (high VOC and particle levels), Turbo Speed is used.
Press the accent light button to turn the light on or off.
Your air purifier is programmed to indicate the VOC and Particle
levels in your indoor environment. A green light indicates good air
quality (low VOC and particle levels). A red light indicates bad air
quality (high VOC and particle levels). If light is red, we recommend
turning your air purifier to Turbo or Auto Mode.