INSTALLATION
Turn off the controller power using the power
switch on the transformer.
Module Installation
Remove the dust cover, or existing module,
from the bottom rear of the controller facepack.
Push up on the spring-loaded button and pull
downward to remove.
Push up
Slide in the new module until the lock clicks.
SIM Card Replacement
The module includes a tool for SIM card removal
or installation. This tool is normally only used
when changing from the Hunter-supplied SIM
to a local SIM.
1. Remove the tool from the receptacle on the
module
2. Insert it in the SIM card slot (domestic
and international SIM slots are in slightly
different locations). Gently press on the
SIM with the tool and release. The SIM will
eject partially. The tool can also be used to
remove the SIM card if necessary.
3. Before inserting a new SIM, verify the
correct orientation of the SIM as indicated
by the icon on the product. Load the SIM
card into the tool and push it gently into the
slot until it clicks into place.
➊
➋
➌
