Hunter 9002X Скачать руководство пользователя страница 4

4

41479-01  01/06/2005

GROUNDING INSTRUCTIONS

 

WARNING

FIGURE 2

FIGURE 1

Grounded
Plug

Grounding Pin

Grounded Outlet

Box Cover

Grounded Outlet
Box Cover

Metal
Screw

Adapter

Grounding
Means

This appliance is for household use
only and may be plugged into any
120-volt AC electrical outlet (ordi-
nary household current). DO NOT
use any other type of outlet.

This unit is suitable for
grounded receptacle use only.

The cord has a grounded plug as
shown in Figure 1. An adapter, as
shown in Figure 2, is available for
connecting three-blade grounding-
type plugs to two-slot receptacles.
The green grounding lug extending
from the adapter must be connected
to a permanent ground such as a
property grounded outlet box. The
adapter should not be used if a
three-slot grounded receptacle is
available.

LINE CORD SAFETY TIPS

1. NEVER pull or yank on the cord

or the appliance.

2. To insert plug, grasp it firmly and

guide it into the outlet.

3. To disconnect the appliance,

grasp the plug and remove it
from the outlet.

4. Before each use, inspect the line

cord for cuts and/or abrasion
marks. If any are found, the ap-
pliance should be serviced and
the line cord replaced. Please re-
turn it to our Service Department
or to an authorized service repre-
sentative.

5. NEVER wrap the cord tightly

around the appliance, as this
could place undue stress on the
cord where it enters the appli-
ance and could cause it to fray
and break.

6. DO NOT operate appliance if the

line cord shows any damage, if
the appliance works intermit-
tently or stops working entirely.

41479-01 Rev 01-06-05.pmd

1/6/05, 5:06 PM

4

Содержание 9002X









Отзывы: