Hunter 51059, Руководство по установке, Страница: 6 / 9

5 6
1886 1886
Ceiling Bracket Hanging Fan Wiring Motor Housing Blades Switch Housing
Installing the Blades:
Insert grommets found in the hardware bag into the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x5
Repeat x5
x10
Lightly attach the blade irons to the motor
with screws found in the hardware
bagc, then securely tighten after both
screws are attached.
Blade Arm Screw
Fan style may vary.
Note:
Assembling Switch Housing Installing the Motor Housing
1
STEP
2
STEP
Raise the motor housing up over the motor and ceiling
bracket. Turn the motor housing so the screw holes align
and the indentation in the housing locks into place with
the notch in the ceiling bracket.
The motor housing is
not secured until the next step is complete. Do not
leave unattended.
With a Phillips head screwdriver, install
the four motor housing screws found in
the
hardware bag. Tighten all four
screws securely.
x4
bag
Notch
Indentation
Motor Housing
Screw
bag
x15
x15
bag
bag
Blade Screw
Grommet