14
45055-01 • 06/05/09 • Hunter Fan Company
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Uninstalling the Light Fixture
7-15. To uninstall the light fixture, first disconnect the plug connectors
between the black wire and the black wire with a white
stripe.
7-16. Disconnect the plug connectors between the two white
wires.
7-17. Remove the two screws attaching the light kit to the lower
switch housing.
7-18. Remove the light fixture from the lower switch housing,
pulling disconnected wires through the hole in the center of
the lower switch housing.
Note:
When removing the wires, pull the thin plug
connector (male) through first, and then pull the other plug
connector (female) through the hole.
7-19. Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing.
7-20. Install the switch housing cap and plug button to the lower
switch housing.
7-21. Once you have uninstalled the light fixture, continue
with Step 7-1.
Male Dummy
Terminal
Female Dummy
Terminal
Step 7-20
Cap
Plug Button
Lower
Switch Housing
Threaded Rod
Steps 7-15 – 7-18
