Step Title
7
Hunter Fan Company
42406-01 • 20080926
4 • Wiring the Fan
All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
Wall switches are not included. Select an acceptable general-use switch in
accordance with national and local electrical codes.
4-1. Make sure the power to the outlet box and associated wall switch
location is still OFF.
To connect the wires, hold the bare metal leads together and place a
wire connector over them, then twist the wire connector clockwise
until tight.
CAUTION:
Be sure no bare wire or wire strands are visible after
making connections.
Single Switch Wiring:
If you want to, you can control both fan and light with one switch. To
do so connect the wires as follows:
• The bare or green ground wire from the ceiling to the green
ground wire from the ceiling plate and the green ground wire
from the fan
• The white wire from the ceiling to the white wire from the fan
• The black wire from the ceiling to the black and the black/white
wire from the fan
Dual Switch Wiring:
• The bare or green ground wire from the ceiling to the green
ground wire from the pipe ball assembly
• The white wire from the ceiling to the white wire from the fan
• The black wire from the ceiling to the black wire from the fan
• The black/white wire from the fan to the wire for the wall switch
4-2. Push all wires and wire connectors into the outlet box.
Single Switch Wiring
Dual Switch Wiring
Wire connector
