Hunter 42013-01 Скачать руководство пользователя страница 13

12

Hunter Fan Company 

42013-01 • 02/02/05

13

42013-01 • 02/02/05 

Hunter Fan Company

8 • Operating and Cleaning Your Ceiling Fan

In warm weather

, use 

downward air fl ow pattern

In cold weather

, use upward 

air fl ow pattern

8-1.  Turn on electrical power to the fan.
8-2.   e fan pull chain controls power to the fan.  e pull chain has 

four settings in sequence: High, Medium, Low and Off .

•  Pull the chain slowly to change settings.
•  Release slowly to prevent the chain from recoiling into the 

blades.

•   e chain uses a breakaway connector that separates if the 

chain is jerked. If this happens, simply reinsert the chain into 
the connector.

8-3.   e light pull chain controls power to the light.  e pull chain has 

two settings: On and Off .

8-4.  Ceiling fans work best by blowing air downward (counterclockwise 

blade rotation) in warm weather to cool the room with a direct 
breeze. In winter, having the fan draw air upward (clockwise blade 
rotation) will distribute the warmer air trapped at the ceiling 
around the room without causing a draft. 

8-5.  For cleaning fi nishes, use a soft brush or lint-free cloth to prevent 

scratching. A vacuum cleaner brush nozzle can remove heavier 
dust. Remove surface smudges or accumulated dirt and dust using 
a mild detergent and a slightly dampened cloth. You may use 
an artistic agent, but never abrasive cleaning agents as they will 
damage the fi nish.

8-6.  Clean wood fi nish blades with a furniture polishing cloth. 

Occasionally, apply a light coat of furniture polish for added 
protection and beauty. Clean painted and high-gloss blades in the 
same manner as the fan fi nish.

To Change Airfl ow Direction

Turn the fan off  and let it come to a complete 
stop. Slide the reversing switch on the fan to the 
opposite position. Restart fan.

Reversing 
Switch

Содержание 42013-01















Отзывы: