42999-01 06/07/2006
© 2006 Hunter Fan Company
6
Lcd Messages
1.
Misting control:
When the humidity is
higher than the set humidity, the heater
will stop misting, and the misting icon
will blink. When the unit is in normal
misting mode, the misting icon will be
illuminated.
.
continuous Indicator:
When the LCD
screen displays the CO % message, it
will also illuminate the continuous icon,
indicating the humidifier is working
continuously.
3.
Refill Warning:
When the water level
is too low, the heater will stop. The refill
icon will blink to indicate that the tank
needs to be refilled. After refilling the
water tank, you must press the RESET
button to reactivate the unit.
4.
humidity Set Range:
Humidity may
be set between 40 % RH and 85 % RH
in increments of 5 %. If the humidity is
set higher than 85 %, the LCD screen
will display the CO % RH message,
indicating the humidifier is set to work
continuously.
5.
humidity display Range:
The
humidity or ROOM display range is
40 % to 80 % RH. The LCD screen will
display LO % if the humidity in the room
is lower than 40 %. If the humidity in
the room is higher than 85 %, the LCD
screen will display HI %.
6.
Setting humidity:
Press UP or DOWN
to change the humidity setting by 5 %
up or down, respectively. The LCD screen
will display the SET message and the
digits on the screen will blink for two
seconds until you change the setting.
Once the humidity level is set, the LCD
screen will display the current room
humidity and the ROOM message.
1
2
3
4
5 6
operating Your humidifier
42999_EngFr_WM Dig Humid.indd 6
6/7/06 1:25:24 PM
