Hunter 28439 Скачать руководство пользователя страница 14

Страница: 14 / 17

45059-01 • 07/16/09 • Hunter Fan Company

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Lower Switch

Housing

Threaded Rod

Steps 7-11 – 7-15

Step 7-21

Switch Housing

Cap

Plug Button

Uninstalling the Light Fixture

7-9. Remove the lower switch housing screws, then remove the lower

switch housing.

7-10. To uninstall the light fixture, disconnect the 9-pin plug connectors.
7-11. You must remove the wiring harness and its components from the

integrated light fixture. You must then install the wiring harness

into the empty switch housing included with the fan.

7-12. Locate the reversing switch and carefully remove the two screws

holding the reversing switch to the lower switch housing. Then,

remove the reversing switch from the housing.

7-13. Remove the patented breakaway connector from the end of the

fan pull chain. Carefully loosen the bellmouth nut from the pull

chain and remove the pull chain switch from the light fixture

housing.

7-14. Locate and carefully remove the two capacitors.
7-15. Unplug the two-pin wire connector with one white wire and

a black with white striped wire coming from the multi-wire

connector.

7-16. You have now disconnected the wiring harness and its

components and are ready to install them into the empty switch

housing. (The light switch remains in the light assembly housing.)

7-17. Insert the pull chain and fan pull chain switch through the round

opening on the side of the empty switch housing. Thread the

bellmouth nut over the pull chain and hand tighten the bellmouth

nut.

7-18. Reattach the breakaway connector to the pull chain.
7-19. Insert the reversing switch into the square hole on the side of the

switch housing. Install and tighten the two screws you removed

previously from the other switch housing.

7-20. Carefully place the capacitors in the switch housing.
7-21. Install the switch housing cap and plug button to the lower switch

housing.

7-22. Re-attach the 9-pin plug and reinstall the lower switch housing

screws.

Lower Switch

Housing

Screw

Bracket

Assembly

Screws

Ins

ll bulb(s) & G

Содержание 28439


















Результаты поиска

Содержание 28439

Отзывы:

Похожие инструкции для 28439

Бренды по названию

Популярные бренды

Hunter 28439, Руководство пользователя и инструкция по установке

Результаты поиска

Содержание 28439

Отзывы:

Похожие инструкции для 28439

Бренды по названию

Популярные бренды