Hunter Stoves Telford Inset 5 MKII Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 25

Hunter Stoves Telford Inset 5 MKII Скачать руководство пользователя страница 2

2

JINTDI05 Rev E 20/04/54

CONTENTS INDEX:

TECHINCAL SPECIFICATION……………………………………………………………………………………………….

3

IMPORTANT INFORMATION……………………………………………………………………………………………..

4

FLUE ADAPTOR INSTRUCTIONS............................................................................................

6

DIRECT AIR ADAPTOR INSTRUCTIONS..................................................................................

7

PRE INSTALLATION REQUIRMENTS……………………………………………………………………………………

9

REMOVING INTERNAL COMPONENTS..................................................................................

12

INSTALLATION INSTRUCTIONS…………………………………………………………………………………………..

14

COMMISSIONING AND HANDOVER…………………………………………………………………………………..

15

USER INSTRUCTIONS…………………………………………………………………………………………………………

16

MAINTENANCE & SERVICING…………………………………..………………………………………………………..

19

SPARES INFORMATION……………………………………………………………………………………………………..

21

COMMISSIONING & INSTALLATION CHECK LIST……………..……………….………………………………..

24

SERVICE RECORDS……………………………………………………………………………………………………………..

25

Hunter Stoves,
Emperor Way,
Exeter Business Park,
Exeter,
Devon. EX1 3QS

Email -

[email protected]

Website -

www.hunterstoves.co.uk

W

ARRANTY

Hunter Stoves appliances come with a standard 2 year warranty, however this excludes naturally wearing
“consumable” components and the use of un-authorised fuels.
Consumables are deemed to be;
Glass, Seals, Gaskets, Grate Components, Log Retainers, Baffles and the surface finish of the appliance.
The Warranty will only be valid if the appliance is installed by an appropriately qualified engineer in
accordance with the manufacturer’s instructions and to the appropriate Building Regulations and/or Local By-
Laws and serviced within 12 months of installation.
Hunter Stoves will also support an extended 5 year warranty on external Cast Iron components such as Doors,
Flue Collars and Covers.
If this appliance is purchased through an un-authorised stockist or an internet trader Hunter Stoves are only
obliged to support the statutory requirements.
This appliance must be regularly serviced and maintained, using only Hunter Stoves approved components for
the Warranty to be valid.

«
1
2
3
4
...
»

Содержание Telford Inset 5 MKII


























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды