Assembly Steps
Your new motorcycle requires adult assembly. Please set aside at least 40 minutes for
assembly. Children can be harmed by small parts, sharp edges and sharp points in the
vehicle's unassembled state. Care should be taken in unpacking and assembly of the
vehicle. Children should not handle parts, or help in assembly of the vehicle.
Please identify all parts before assembly and save all packaging material until assembly
is complete to ensure that no parts are discarded.
Assembly tool for need: screwdriver(not included), pliers(not included), hammer(not
included), spanner.
1. Install the training wheel
Remove two nuts and one washer
from the side of the rear axle.
Install the training wheel, and then
load on the washer, tighten the nut.
Fix another wheel on the other side.
2. Install the pedal.
As shown in the picture,the axle
passes through the body.
Install the pedal,and fasten with the
screws.
The other side is same as above .
FOR CUSTOMER SERVICE ENQUIRIES & SPARE PARTS
PLEASE CONTACT
HUNTER PRODUCTS TOLL FREE 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
-5-
