Hunter Marine HUNTER 25 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 128

Hunter Marine HUNTER 25 Скачать руководство пользователя страница 80

ENVIRONMENTAL CONSIDERATIONS

FUEL AND OIL SPILLAGE

The spilling of fuel or oil into our waterways con-
taminates the environment and is dangerous to wild-
life. Never discharge or dispose of fuel or oil into the
water. It is dangerous and unlawful. Two common
types of accidental discharge are overfilling the fuel
tank and pumping contaminated bilge water into the
sea.

EXPLOSION/FIRE/POLLUTION HAZARD:

Fill fuel tank to less than rated capacity. Overfill

forces fuel out the tank vents, which can cause ex-

plosion fire, or environmental pollution. Also allow

for fuel expansion

DISCHARGE AND DISPOSAL OF WASTE

Waste means all forms of garbage, plastics, recy-
clables, food wood, detergents, sewage, and even
fish parts in certain waters. We recommend that you
bring back everything you take out with you for
proper disposal ashore.

Your marine holding tank (if so equipped) must, in
many areas, be pumped out by an approved pump-
out facility normally found at marinas.

EXHAUST EMISSIONS

Hydrocarbon exhaust emissions pollute our water
and air. Keep your engine properly tuned to reduce

emissions and improve performance and economy.

ANTI-FOULING PAINTS

The use of anti-fouling paints is common for
boats kept in water. Be aware of environmental
regulations that may govern your paint choice.
These regulations may affect which paint may
be used, and also the application or removal.
Contact your local boating authorities for more
information

EXPLOSION/FIRE/HAZARD

:

Ventilate when painting or cleaning.

Ingredients may be flammable and/or explosive.

CLEANING CHEMICALS

Cleaning chemicals should be used sparingly
and not discharged into waterways. Never mix
cleaners and be sure to use plenty of ventilation
in enclosed areas. Do not use products that
contain phosphates, chlorine, solvents, non-
biodegradable or petroleum-based products.

Common households cleaning agents may
cause hazardous reactions. Fumes can last for
hours, and chemical ingredients can attack
people, property and the environment.

PAGE 25

«
...
78
79
80
81
82
...
»

Содержание HUNTER 25

































































































































Отзывы:

Нет отзывов