Hunter Douglas Provenance, Установка Эксплуатация Уход

Страница: 7 / 16

INSTALLATION
5
Mount the Installation Brackets — Outside Mount
■
Center the headrail over the window opening at the desired height. Use a pencil to lightly
mark each end of the headrail.
➤
Alternatively, measure the width of the headrail and use that width to mark the headrail
end points over the window opening.
■
Mark 1" in from each end of the headrail.
➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood
whenever possible.
■
Center the brackets on your marks, then mark each of the screw holes.
➤
A minimum 2" flat vertical surface is required to mount the brackets.
➤
The top of the installation brackets should be at the desired shade height.
Important:
The brackets should be level and aligned.
CautIon: The rear of the brackets must be flush against a flat mounting surface. Do not
mount brackets on curved molding.
■
Drill the screw holes using a
3
/
32
" drill bit.
■
Attach the installation brackets using the screws provided.
Important:
Use drywall anchors when mounting
into drywall.
Outside Mount
Inside Mount
Headrail End Slot Center Slot(s)
on Larger Shades
End Slot
Outside Mount
1"
1"