EASE FABtool installation
Use the FABtool to program your EASE blinds.
Requirements
Hardware setup
Before you run the tool make sure the above hardware is properly setup:
Windows 10 computer
• REQUIRED
• To be sourced by fabricator
Keypad
• OPTIONAL, but strongly advised
• To be sourced locally
• USB connection
EASE dongle
• REQUIRED
• Supplied by Hunter Douglas
• USB connection
QR-code scanner
Currently support models:
• Honeywell Xenon 1900/1910
series
• ZEBRA DS2208
• OPTIONAL, but for production
environments strongly advised.
It is
possible to enter a barcode using the
keyboard, but is very time consuming
• USB connection
• To be sourced locally
MANUAL
Page 1 of 5
version: 1.0
