Hunter Douglas Design Studio Roman Shades Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 20

background image

CARE

15

Shade Removal (If Necessary)

Raise the shade completely before removing it.

■

Remove the valance fabric or dust cover. Carefully peel the hook-and-loop material from its
attachment on the valance headboard or headrail.

■

Support the headrail so that it does not fall. Push up on the headrail and use your finger or
a flat blade screwdriver to release the bottom tab, as shown.

■

Pull the headrail straight out from the installation brackets.

Dressing Design Studio

™

Roman Shades

■

After installation:

Allow shades to hang fully lowered for a few days to let wrinkles fall out.

■

“Dressing” refers to easing the fabric into soft folds across the shade to create a uniform
appearance.

■

If a shade is left in the raised position with the folds dressed for an extended period, the
folds may retain their shape over time, and may require less dressing.

Cleaning Procedures

The following options are available for cleaning your shade:

■

Dusting.

Light dusting with a feather duster is usually all the cleaning that is needed.

■

Vacuuming.

Vacuum on low suction for dust removal.

NOTE:

As with all textiles, the fabric on your Roman shade(s) is subject to some inherent

variations. Slight dye-lot variations, puckering or wrinkling are within textile industry
standards and should be considered normal.

Push Up

Headrail

Release Using

Finger or Flat

Blade Screwdriver

Pull Headrail

from Bracket

1

2

3

«
...
15
16
17
18
19
...
»

Содержание Design Studio Roman Shades





















Отзывы:

Нет отзывов

Похожие инструкции для Design Studio Roman Shades

Бренд: Gazelle Страницы: 6

Бренд: XROCKER Страницы: 18

Toronto Hall Table 2 Drawer

Бренд: fantastic furniture Страницы: 7

Бренд: fantastic furniture Страницы: 12

Бренд: fantastic furniture Страницы: 12

Бренд: fantastic furniture Страницы: 9

Бренд: fantastic furniture Страницы: 12

Бренд: µ-Dimension Страницы: 5

Бренд: PATIOJOY Страницы: 9

Бренд: Cooper Lighting Страницы: 2

Бренд: PROGARDEN Страницы: 9

Бренд: Home Decorators Collection Страницы: 12

Бренд: Walker Edison Страницы: 8

Бренд: VAS Страницы: 16

Бренд: Zaor Страницы: 3

Бренд: Rauch Страницы: 50

Бренд: Jet-Line group Страницы: 10

PARENTESI CS/4027

Бренд: calligaris Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды