CARE
19
Removing the Shading
■
Move each lever of the installation brackets to the left to release
the shading.
➤
A flat blade screwdriver can be used to move the lever.
CautIon:
Be very careful not to tear or damage any of
the fabric.
➤
If the lever is inaccessible
or inoperable, lower the
shading until you can see
the underside of the bracket.
Carefully reach a small flat
blade screwdriver behind the
shading to the tab on bottom
of the bracket between the
screw holes.
➤
Push the tab away from
the shading and pull the
headrail to release it from
the bracket.
■
Carefully pull the shading to remove it from the brackets.
Cleaning Procedures
Silhouette
®
and Nantucket
™
window shadings are made of 100% polyester, which means they
are inherently durable and resilient. However, care must be taken to avoid wrinkling the fabric,
particularly where the vanes meet the facings.
The Palette
®
Fabric-Covered Headrail
Spot-clean the headrail using a sponge or delicate cloth, cool distilled water and a mild soap
solution; handle with care as you would any fine fabric.
Dusting
Regular light dusting with a feather duster is all the cleaning that is needed in most
circumstances.
Vacuuming
Use a low suction, hand-held vacuum for more thorough dust removal.
Move the lever to the left
to release the shading.
Top View
Tab
Installation Bracket
Underside of
Bracket
End Cap
