Install&User’s Guide
112
Reference : Please, check below to configure event recording.
1. Select one of Manual&Event, Schedule&Event.
2. In program configuration, set frame rate by 0 fps in general mode and only
configure Event frame rate.
3. Set Event applying time.
Event Time configuration
Configure time for event recording and there are 3 mode – Always, no use, Timezone.
In “Always”, event works all the time and in “Timezone”, works during configured time.
Configuration of Timezone is similar with schedule configuration and can configure
weekday,time for Event.
•
• INDEX : Set from 1 to 50
• Weekday : Set weekday applicable
• Time : Set time applicable
• Deletion: Delete per INDEX
Configuration
Configured INDEX,weekday,time will be shown at once.
Select recording start time and end time in order and its INDEX,weekday,time will be shown.
Deletion
Select INDEX and click Delete button
If clicking delete button without INDEX, previously selected INDEX will be deleted first and after
