Hunt CCTV HTP-T32G28D, Руководство пользователя

Страница: 8 / 35

HTP-T32G28D User Manual
-7-
”
CMS (Central Monitoring System)
CMS is a Window-based remote monitoring program in order to monitor or control video, audio, and events in
real time from several IP cameras or video servers. Please refer to the CMS User Manual for more in detail.
2. Installation
1. Connecting Network (LAN)
- Connect the power adaptor to HTP-T32G28D
- Connect network cable to Ethernet port.
2. Connecting Audio
Audio is full-duplex. It is possible to set the mode as Tx-only, Rx-only or Tx-Rx.
- Connect audio input and output ports to audio devices accordingly.
- The Audio signal required is line level, so audio equipment with an amp, mixer or other amplifier should be
used.
3. Connecting Serial Ports
RS-485 of HTP-T32G28D can be connected to external equipment such as PT receiver etc. PC client can send
PT commands to the external equipment via the serial port.
When a decoder system instead of PC client is connected to HTP-T32G28D, the serial port and that of the
decoder system works in pass-through mode. That is, data from at one port is delivered to the other port, vice
versa .
4. Connecting Sensor & Alarm
Connect sensor and alarm devices to corresponding terminals accordingly
Camera
Decoder
Site
Remote Center
Camera
CMS
CMS
Site
Remote Center