15
Polycarbonate sheet
PVC Locking strip
5
Step5
1
Step1
3
Step3
5
Step5
2
Step2
4
Step4
6
Step6
PVC Locking strip
1
Step1
3
Step3
6
Step6
4
Step4
2
Step2
Note:
PVC locking strips are pushed into place from the top and the bottom in a diagonal
direction, bit by bit, so the PVC locking strips are fitted evenly. If you fully insert the PVC
locking strips from one side only, the polycarbonate panel may move sideways making it
very difficult to insert the PVC locking strip to the other side.
Do a trial run before you the sealer on one sheet, so you get the hang of it. This avoids a
mess if you have to pull it out again. Page 16 shows you how to insert the pvc locking
strips. Easy once you know how.
As mentioned before.
If you are in a high wind area you might like to consider using ADOS MS
high performance adhesive sealant instead of the sealer supplied. Not cheap, but this stuff really
sticks. Available from Mitre 10, Bunnings etc.
