Appendix2: Set Controller IP by Tool
A
、
Overview
：
HTA-830 Tool.exe is a program that automatically locates TCP/IP based controller as well
as modify the device’s IP address. This program is application to TCP/IP device and does
not require installation. Double click on the programs to execute.
This program used broadcast search and connection method. And the terminal’s firewall
should be shut down in order to locate the devices.
B
、
Workspace Description
：
Device List – Found devices are listed in this area. The following parameters are
also included in the listing:
HUNDURE
16
HTA-810/20 PE/PM Hardware manual
z
MAC ID (Media Access Control Identification): It serves as unique identifier of
the device connected over the network. This fixed identification number is set
from the factory and is not allowed to be modified.
