Hunan GLINT 2.0, Быстрый старт

Страница: 7 / 11

Remove the Intelligent Flight Battery
l
Please use the official charger that provided by Keyshare. Remove the intelligent flight battery from aircraft before
charging.
l
Connect the intelligent flight battery charger to the AC power supply (100-240V, 50-60Hz; if required, please use the
power adapter). Connect the charger to the remote controller. If the charger LED of remote controller is red, the
charger is working.
l
The intelligent flight battery and remote controller can charge under on/off status. It is recommended that you turn
off the intelligent flight battery or remote controller before charging.
l
In the charging status, the battery indicator on both the intelligent flight battery and remote controller display the
current power.
l
When the battery indicator is off, the battery is fully charged. Please remove the aircraft charger. While the charger
LED of remote controller turns to green light from red light, the charging is completed.
5. Prepare the Remote Controller
Install the mobile device holder on remote controller and adjust the position of Antenna. The strength of the remote controller ’ s signal will
fluctuate depending on the position of the antennas.
（）
\
①
Install the mobile device holder, and place the mobile device
②
Adjust the holder to ensure the mobile device is held securely in place.
③
Connect to Wi-Fi
1. Turn on the remote controller, and turn on the intelligent flight battery, when the remote controller can display the flight battery
normally, it indicates that the flight and remote controller connect successfully.
2. Turn on the mobile device with 5G Wi-Fi connection, start the Wi-Fi function of the mobile device, waiting for 30 seconds, and select
The transmission signal between the aircraft and
remote controller will be strongest within the range
illustrated here. If the signal is weak, adjust the
positions of the antennas and fly the aircraft closer
to achieve optimal signal performance.