9
SCANNING FEATURES
SCANNING ALL CHANNELS
The VHF5 scans all channels in one of two modes: normal or
priority scan. You may program the VHF5 to scan in either mode.
In normal scanning, the VHF5 rapidly scans through channels,
either in the USA or International band. The VHF5 stops scanning
on busy channels and remains stopped several seconds after the
signal disappears allowing time to answer the call if necessary.
In priority scanning, the scanning operation is the same as
normal scanning except Channel 16 is constantly checked for
activity, allowing for much quicker response to Channel 16 traffic.
To scan channels, press and hold the
SCAN/DUAL
button for a
few seconds. The VHF5 begins scanning channels using the scan
method programmed in the radio. The word SCAN appears on
the LCD. To stop scanning, press the
SCAN/DUAL
button.
Programming for Normal or Priority scanning:
1. Turn the unit off. Press and hold the
FUNC
button while
turning the power on. The unit displays
02
or
03
. Release
the
FUNC
button.
2. Press the
FUNC
button again. The radio displays
n-sc
or
p-sc
.
3. Rotate the
CHL/SQL
knob to choose
n-sc
for normal scan,
or
p-sc
for priority scan.
4. Press the
16
button twice to store programming.
Deleting Channels from Scan
To delete a channel from scan, select the channel to be deleted.
Press the
FUNC
and
SCAN/DUAL
buttons at the same time.
L appears on the LCD, indicating the channel is locked out of
scan. This is useful for bypassing channels that are continuously
busy. To activate a deleted channel, select the channel to be
activated then press the
FUNC
and
SCAN/DUAL
buttons at
the same time.
Содержание VHF5
Страница 1: ...OPERATIONS MANUAL...
