System Status
Use
System Status
to view system connections and to conduct a unit self-test.
The following screens are displayed in turn when you press the VIEW button
when using System Status:
•
Self Test
•
Accessory Test
•
GPS Diagnostic View.
Exit System Status by powering your 900 Series™ off.
Self Test
Self Test
displays results from the internal diagnostic self test, including unit
serial number, Printed Circuit Board (PCB) serial number, software revision,
total hours of operation and the input voltage.
Accessory Test
Accessory Test
lists the accessories connected to the system.
NOTE:
The speed accessory will be detected only if the paddlewheel has moved
since your 900 Series™ was powered up.
Accessory Test Screen
Self Test Screen
43
531569-1_B - 955c ManE.qxp 3/4/2007 5:04 PM Page 43
